PTO Connect SD Easy Max Adapter Set
Fit All Tractor With a Standard Length PTO Output Shaft of 3″ or Longer.
Rated @ 80HP
Adapter Extends PTO Shaft 4 1/2″
Easy to Connect and Disconnect Implements
Not compatible with the models below.
Kubota B, BX & LX Series
Cub Cadet 6284D
Kioti CS2510
LS MT125
New Holland Workmaster 25S
Yanmar SA424
Bad Boy 3026
John Deere 2520
$369.99
Available on backorder
Weight | 12 lbs |
---|---|
Dimensions | 11 × 5 × 5 in |
PTO Connect Adapter
The PTO Connect comes in the standard 1 3/8” 6 splines (540 RPM) to fit most implements and tractors. The adapter contains two connectors, one connector for the tractor and another for the implement. The system prevents the need to twist the PTO shaft to lineup the splines when attaching the PTO implements. This task is accomplished by removing the horizontal splines from the coupler and the output shaft and placing them on the face of the adapters. The splines on the tractor adapter are on a separate plate that will rotate in the left or right direction to line-up with the splines on the implement adapter.
To connect the adapters, all the operator needs to do is slide the tractor and implement connectors together then rotate the inner plate in the left or right direction to line-up with the splines on the implement adapter. Our customers choose this system based on its capability to save operators time while switching between implements, increasing productivity, and reducing back injuries.
PTO Connect Adapter
The PTO Connect comes in the standard 1 3/8” 6 splines (540 RPM) to fit most implements and tractors. The adapter contains two connectors, one connector for the tractor and another for the implement. The system prevents the need to twist the PTO shaft to lineup the splines when attaching the PTO implements. This task is accomplished by removing the horizontal splines from the coupler and the output shaft and placing them on the face of the adapters. The splines on the tractor adapter are on a separate plate that will rotate in the left or right direction to line-up with the splines on the implement adapter.
To connect the adapters, all the operator needs to do is slide the tractor and implement connectors together then rotate the inner plate in the left or right direction to line-up with the splines on the implement adapter. Our customers choose this system based on its capability to save operators time while switching between implements, increasing productivity, and reducing back injuries.
PTO Connect Adapter
The PTO Connect comes in the standard 1 3/8” 6 splines (540 RPM) to fit most implements and tractors. The adapter contains two connectors, one connector for the tractor and another for the implement. The system prevents the need to twist the PTO shaft to lineup the splines when attaching the PTO implements. This task is accomplished by removing the horizontal splines from the coupler and the output shaft and placing them on the face of the adapters. The splines on the tractor adapter are on a separate plate that will rotate in the left or right direction to line-up with the splines on the implement adapter.
To connect the adapters, all the operator needs to do is slide the tractor and implement connectors together then rotate the inner plate in the left or right direction to line-up with the splines on the implement adapter. Our customers choose this system based on its capability to save operators time while switching between implements, increasing productivity, and reducing back injuries.
Featured Products
-
$119.99
-
$183.99
-
$79.99
-
$69.99