64 HP CV Shaft with 1 3/8" 6 Quick Connect at Both Ends Length: 75" - 114" – Part # WB6150
cv joint shaft 106 HP Double CV Joint Shaft with 1 3/8" 6 Quick Connect at Both Ends Length: 81" - 121" $1,966.99
64HP

64 HP CV Shaft with 1 3/8″ 6 Quick Connect at Both Ends Length: 75″ – 114″

Part No. WB6150 · Overall length 75″ – 114″

Wide Angle CV Shaft

See Warning Below.

$1,044.99

Mfg.
Bare-co
Overall Length
75″ – 114″
Cross to Cross
63″ – 102″
Tractor Yoke
1 3/8″ 6 Quick Connect
Implement Yoke
1 3/8" 6 Quick Connect
Series
WB6
HP
64 @ 540 RPM / 100 @ 1000 RPM
Safety Shield
Yes

Questions about this part? We're here to help.

Send us your part number or a photo and we'll make sure you get the right fit.

Text us: 346-465-2689 Email us
Recently Viewed Products

Specifications

64 HP CV Shaft with 1 3/8" 6 Quick Connect at Both Ends Length: 75" - 114" specifications
Part numberWB6150
Mfg.Bare-co
Overall Length75″ – 114″
Cross to Cross63″ – 102″
Tractor Yoke1 3/8″ 6 Quick Connect
Implement Yoke1 3/8" 6 Quick Connect
SeriesWB6
HP64 @ 540 RPM / 100 @ 1000 RPM
Safety ShieldYes
Shipping weight74 lbs
Box size80 × 12 × 12 in

Will it fit?

  1. Hook up the implement and set it at its shortest working position.
  2. Measure from the center of the tractor-end cross to the center of the implement-end cross.
  3. Your measurement must fall inside 63″ – 102″ for this shaft.
Not the right length? Use the PTO shaft selector

About this part

WARNING

80 degree (75 degree for P675 Series) Short Term Operation and Stationary.
25 degree Continuous Operation
Exceeding maximum angle will result in joint ball / socket FAILURE!
(NOT COVERED BY WARRANTY)
Tractor turning limiter should be fitted to the implement drawbar.

Related products