Yoke Type Clutch
Yoke Type Safety Clutch Selector
Pick the shaft series of the PTO shaft the clutch fits, and the hub spline of your implement’s input shaft. All filters are optional.
| Ref | Part # | Part | Fits |
|---|---|---|---|
| 1 | B4200 | Spring | All 2-plate clutches |
| 1 | B4205 | Spring | W2600 Series 4-plate clutch |
| 2 | B4185 | Clutch flange yoke | 4 Series 180 mm (7″) clutch |
| 2 | B4186 | Clutch flange yoke | 6 Series 200 mm (8″) clutch |
| 2 | B4187 | Clutch flange yoke | 8 Series 200 mm (8″) clutch |
| 2 | B4189 | Clutch flange yoke | W2600 Series 200 mm (8″) clutch |
| 2 | B4188 | Clutch flange yoke | W2400 Series 200 mm (8″) clutch |
| 2 | B4192 | Clutch flange yoke | W2500 Series 200 mm (8″) clutch |
| 3 | B4489Ref. 247000054 | Clutch disk 140 × 85 mm (5.5″ × 3.46″) | 4 Series 2-plate 180 mm (7″) clutch, 2 required |
| 3 | B4490Ref. 247006351 | Clutch disk 160 × 85 mm (6.3″ × 3.46″) | 6 Series 2-plate 200 mm (8″) clutch, 2 required |
| 3 | AB160Ref. FA.00.00 | Clutch disk 160 × 97 mm (6.3″ × 3.8″) | W2600 and 8 Series 2- and 4-plate 200 mm (8″) clutches, 2 or 4 required |
| 4 | B4190 | Drive hub 1 3/8″ × 6 spline, 140 mm dia. | 2-plate 180 mm (7″) clutch |
| 4 | B4191 | Drive hub 1 3/8″ × 6 spline, 160 mm dia. | 2-plate 200 mm (8″) clutch |
| 4 | B4197 | Drive hub 1 3/8″ × 21 spline, 160 mm dia. | 2-plate 200 mm (8″) clutch |
| 4 | B4193 | Drive hub 1 3/4″ × 20 spline, 160 mm dia. | 2-plate 200 mm (8″) clutch |
| 4 | B4194 | Drive hub 1 3/4″ × 20 spline, 160 mm dia. | 4-plate 200 mm (8″) clutch |
| 4 | B4207 | Drive hub 1 3/8″ × 6 spline | 4-plate 200 mm (8″) clutch |
| 4 | B4208 | Drive hub 1 3/8″ × 21 spline, 160 mm dia. | 4-plate 200 mm (8″) clutch |
| 5 | B4206 | Center pressure plate, 97 mm (3.8″) ID | 200 mm (8″) 4-plate clutches only |
| 6 | B4198 | Intermediate drive plate | 200 mm (8″) 4-plate clutches only |
| 7 | B4199 | Outer pressure plate | 4 Series 180 mm (7″) clutch |
| 7 | B4196 | Outer pressure plate, 85 mm (3.46″) ID | 6 Series 200 mm (8″) clutch |
| 7 | B4206 | Outer pressure plate, 97 mm (3.8″) ID | 8 Series and W2600 Series 200 mm (8″) clutches |
Torque is approximate and set by spring length. Clutches must be covered with an approved safety guard; AS8409 fits 8″ clutches. Confirm series, HP rating and spline before ordering.