64 HP CV Shaft with Clutch 1 3/8" 21 Splines at Both Ends Length: 75" - 114" – Part # WC61502121
106 CV Joint Shaft pto 100 HP CV Shaft with 1 3/8" 6 Splines at Tractor End with no Implement Yoke Length: 60" - 85" $1,193.99
106 CV Joint Shaft pto 125HP CV Shaft with 1 3/8" 6 Splines at Tractor End and 1 3/8" 21 at Implement End Length: 68" - 107" $2,953.99
Series 664HP

64 HP CV Shaft with Clutch 1 3/8″ 21 Splines at Both Ends Length: 75″ – 114″

Part No. WC61502121 · Overall length 75″ – 114″

Series 6 CV Joint PTO Shaft

Wide Angle Shaft

See Warning Below.

$989.99

Mfg.
Bare-co
Overall Length
75″ – 114″
Cross to Cross
63″ – 102″
Tractor Yoke
1 3/8″ 21 Quick Connect
Clutch
1 3/8″ 21
Clutch Dia.
8"
Series
WB6
HP
64 @ 540 RPM / 100 @ 1000 RPM
Safety Shield
Yes

Units Sold: 1

Questions about this part? We're here to help.

Send us your part number or a photo and we'll make sure you get the right fit.

Text us: 346-465-2689 Email us

Specifications

64 HP CV Shaft with Clutch 1 3/8" 21 Splines at Both Ends Length: 75" - 114" specifications
Part numberWC61502121
Shaft seriesSeries 6
Mfg.Bare-co
Overall Length75″ – 114″
Cross to Cross63″ – 102″
Tractor Yoke1 3/8″ 21 Quick Connect
Clutch1 3/8″ 21
Clutch Dia.8"
SeriesWB6
HP64 @ 540 RPM / 100 @ 1000 RPM
Safety ShieldYes
Power rating64 HP at 540 rpm
Shipping weight106 lbs
Box size80 × 12 × 12 in

Will it fit?

  1. Hook up the implement and set it at its shortest working position.
  2. Measure from the center of the tractor-end cross to the center of the implement-end cross.
  3. Your measurement must fall inside 63″ – 102″ for this shaft.
  4. Check your tractor's HP is at or below 64 HP at 540 rpm.
Not the right length? Use the PTO shaft selector

About this part

WARNING

80 degree (75 degree for P675 Series) Short Term Operation and Stationary.
25 degree Continuous Operation
Exceeding maximum angle will result in joint ball / socket FAILURE!
(NOT COVERED BY WARRANTY)
Tractor turning limiter should be fitted to the implement drawbar.

Related products