Series 664HP

64 HP Series 6 CV Joint Shaft with Torque Limiter, 1 3/8″ 6 Splines Both Ends, 60″ (1.5 m)

Part No. WT6150

Series 6 CV Joint PTO Shaft

Wide Angle Shaft

See Warning

80 degree (75 degree for P675 Series) Short Term Operation and Stationary.
25 degree Continuous Operation
Exceeding maximum angle will result in joint ball / socket FAILURE!
(NOT COVERED BY WARRANTY)
Tractor turning limiter should be fitted to the implement drawbar.

$1,172.99

Mfg.

Bare-co

Length

60″ (1.5 m)

Tractor Yoke

1 3/8″ 6 Quick Connect

Implement Side

Torque Limiting Yoke 1 3/8″ 6 Splines

Series

WB6

64 @ 540 RPM / 100 @ 1000 RPM

Safety Shield

Yes

Ship From

Clear

Questions about this part? We're here to help.

Send us your part number or a photo and we'll make sure you get the right fit.

Text us: 346-465-2689 Email us

⚠ WARNING: Rotating drivelines can cause serious injury or death. Keep all guards and shields in place, shut off the engine and remove the key before working on the driveline, and use a part rated for your tractor and implement.

⚠ WARNING (California): This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Specifications

64 HP Series 6 CV Joint Shaft with Torque Limiter, 1 3/8″ 6 Splines Both Ends, 60″ (1.5 m) specifications
Part number	WT6150
Shaft series	Series 6
Mfg.	Bare-co
Length	60″ (1.5 m)
Tractor Yoke	1 3/8″ 6 Quick Connect
Implement Side	Torque Limiting Yoke 1 3/8″ 6 Splines
Series	WB6
HP	64 @ 540 RPM / 100 @ 1000 RPM
Safety Shield	Yes
Power rating	64 HP at 540 rpm
Shipping weight	77.2 lbs
Box size	65 × 12 × 12 in

Browse

Want to chat?

64 HP Series 6 CV Joint Shaft with Torque Limiter, 1 3/8″ 6 Splines Both Ends, 60″ (1.5 m)

Browse

Want to chat?

64 HP Series 6 CV Joint Shaft with Torque Limiter, 1 3/8″ 6 Splines Both Ends, 60″ (1.5 m)

Specifications

Related products